Author Topic: Snap and glue to guides after modifying angle  (Read 3903 times)

0 Members and 1 Guest are viewing this topic.

stephenberkmn

  • Newbie
  • *
  • Posts: 2
Snap and glue to guides after modifying angle
« on: March 26, 2015, 09:11:57 AM »
I'm trying to use guides to align objects for an isometric design. I use the shapesheet to set the angle to -30 and the guide changes, no problem. But now I can't get shapes to snap or glue to the modified guides, though they will snap and glue to unmodified guides. I compared the shapesheets of a modified and unmodified guide and don't see anything different except the x/y location on the sheet. What am I missing here? Is this a bug or just a problem with the end user, aka me?

Yacine

  • Hero Member
  • *****
  • Posts: 2991
Re: Snap and glue to guides after modifying angle
« Reply #1 on: March 26, 2015, 12:19:01 PM »
For 1D shapes there seems to be no difference.
For 2D I can confirm what you write.
However, I've noticed that when you glue a show to a non-rotated guide, that shape stays glued when the guide is rotated afterwards.
Probably a too seldom case to have not noticed it before.
Yacine

stephenberkmn

  • Newbie
  • *
  • Posts: 2
Re: Snap and glue to guides after modifying angle
« Reply #2 on: March 26, 2015, 01:03:31 PM »
I'll give that a try, thanks!