How do you change a number that is a measurement in to a regular number.
How it comes out
Sheet.1!Width = 50.000 mm
What is needed.
Sheet.1!Width = 50.000
Where you need watch these numbers:
- Size & position window
- Shape's field
It looks like a shapesheet's cell (Width)
This is already a number - it just looks like no number but it is.
If you have a look at the field LocPinX you can see that there's already a formula in it which uses the value of Width (if you take a simple rectangle).
For other cells you can check if these are numbers (to calculate with):
1. insert the section "user defined cells" or a new line in it
2. insert the formula: (the cell you want to calculate with) * 2
3. If the calculation is correct, it's easy
4. If not you have to separate the "numbers" (mid(...)) *1 in order to have NUMBERS.
cheers
hl
Quote from: hidden layer on September 02, 2022, 08:22:16 AM
4. If not you have to separate the "numbers" (mid(...)) *1 in order to have NUMBERS
IMHO best way use formulas like
Quote=width/1 mm
Quote from: Surrogate on September 02, 2022, 04:08:40 AM
Where you need watch these numbers:
- Size & position window
- Shape's field
My apologies to you both. I was not informed that a response had been made.
Thank you for your replies.
I ended up using
FORMAT(Width,"00.00")